TC Clamp

Note: The TC clamp is used to clamp two TC ferrules together. A TC gasket is installed between the ferrule for a complete seal. 304 SS mat.

TC Gasket

Note: TC gaskets are stocked in buna, silicone and Teflon material. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference.

TC Ferrule

Note: The TC ferrule is one end of a three part connection. This is the most commonly used type of sanitary process pipe connection. Ferrules have 1-1/8 in. necks. Longer and shorter necks are available. 304 SS mat.

TC Cap

Note: The TC cap is used to seal the end of a tube, fitting or valve which has a TC ferrule. A gasket and clamp attach the cap. 304 SS mat.

Poly TC Cap

Note: See Miscellaneous.

TC 90 deg. Elbow

Note: The 90 deg. elbow has TC connections on each end. TC elbows allow lines to be broken down for sanitizing. Butt-weld elbows available. 304 SS mat.

TC 45 deg. Elbow

Note: The 45 deg. elbow has TC connections on each end. TC elbows allow lines to be broken down for cleaning. Additional sizes and butt-weld elbows available. 304 SS mat.

TC Tee

Note: The TC has three TC ferrules for multi-purpose application. Custom branch sizes and butt-weld tees available. 304 SS mat.

TC Eccentric Reducer

Note: Eccentric reducers are used for tubing size transitions. The flat side allows complete drainage in horizontal piping. Custom reducers, additional sizes and butt-weld available. 304 SS mat.

TC Concentric Reducer

Note: Concentric reducers are used for TC transitions in vertical tubing. Custom reducers, additional sizes and butt-weld available. 304 SS mat.

Tri-Clamp Connection

Note: Shown for reference.

TC Fittings
TC Clamp	Quan: Note: The TC clamp is used to clamp two TC ferrules together. A TC gasket is installed between the ferrule for a complete seal. 304 SS mat.
TC Gasket	Quan: Note: TC gaskets are stocked in buna, silicone and Teflon material. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference.
TC Ferrule	Quan: Note: The TC ferrule is one end of a three part connection. This is the most commonly used type of sanitary process pipe connection. Ferrules have 1-1/8 in. necks. Longer and shorter necks are available. 304 SS mat.
TC Cap	Quan: Note: The TC cap is used to seal the end of a tube, fitting or valve which has a TC ferrule. A gasket and clamp attach the cap. 304 SS mat.
Poly TC Cap	Note: See Miscellaneous.
TC 90 deg. Elbow	Quan: Note: The 90 deg. elbow has TC connections on each end. TC elbows allow lines to be broken down for sanitizing. Butt-weld elbows available. 304 SS mat.
TC 45 deg. Elbow	Quan: Note: The 45 deg. elbow has TC connections on each end. TC elbows allow lines to be broken down for cleaning. Additional sizes and butt-weld elbows available. 304 SS mat.
TC Tee	Quan: Note: The TC has three TC ferrules for multi-purpose application. Custom branch sizes and butt-weld tees available. 304 SS mat.
TC Eccentric Reducer	Quan: Note: Eccentric reducers are used for tubing size transitions. The flat side allows complete drainage in horizontal piping. Custom reducers, additional sizes and butt-weld available. 304 SS mat.
TC Concentric Reducer	Quan: Note: Concentric reducers are used for TC transitions in vertical tubing. Custom reducers, additional sizes and butt-weld available. 304 SS mat.
Tri-Clamp Connection	Note: Shown for reference.